General Information

• Notice On The Rear Of The Freezer
• Instructions For Unpacking The Freezer

NOTICE ON THE REAR OF THE FREEZER

WARNING!!

The cooling tube is attached to the outside of the interior wall of the cabinet, DO NOT DRILL HOLES OR PIERCE THE CABINET IN ANY WAY.

There is a high risk of piercing the refrigeration pipes. This will result in leakage of refrigerant and possible compressor damage, as well as invalidate the warranty.

Contact your local Kaltis® representative should you wish to make any holes in the cabinet.

Back Top

Instructions For Unpacking The Freezer

1. Cut the binding straps.
2. Remove the cardboard cover. Two persons should lift the cardboard from the bottom upwards, over the freezer.
3. Remove the wrapping. Do not use sharp objects to cut the wrapping, or damage to the cabinet exterior may result.
4. Remove the Styrofoam corners and protective wrapping from the cabinet.
5. Remove the plastic bag.
6. Relax the fasteners using a 13mm wrench.
7. Remove the tape between the cabinet and the door.
8. Open the door and remove the securing tape from the inner doors.
9. Remove the securing tape from the shelves.
10. Remove all the packing in between the shelves.

Back Top

• Kaltis Europe
• Kaltis Africa
• Double Door freezers now available
• Kaltis new green freezers. Good for the Environment – Good for your Lab

• Electrical Temperature Data Logger
• High Environment HE Freezers
• Hydrocarbon Green Freezers
• Ultra Low -86°C Freezers
• Low -40°C Freezers
• Accessories
• Inventory Systems